Dell UPS 1920T - Manual (Page 49)

49 Configuring the Card |
Network Settings
Click Network from the menu bar to configure the network parameters of the card and authorize the
remote upgrade of the embedded system (see Figure 31).
Figure 31. Network Settings Page
Configurable network settings are:
S
IP Address: The IP address of the card (for example, 166.99.224.70).
S
Subnet Mask: The mask of the sub-network of your network (for example, 255.255.255.0).
S
Gateway Address: The IP address of the gateway to access the stations located outside the card's
subnet (for example, 166.99.224.1).
S
Hostname: The host name of the card. First part of the fully qualified domain name used by the
Domain Name System (DNS).
Because the card does not support NetBIOS protocol, the hostname is sent to DNS only if the
DHCP server sends the hostname with the new IP address. This mechanism is described in the
update of the DNS protocol RFC 2136.
S
Domain Name: The domain to which the card belongs. The domain name is the part of the fully
qualified domain name that follows the hostname and is used by the DNS. The default value of
the two parameters comprising the fully qualified domain name: ups.domain.com.