beautypg.com

Dell Dimension 8300 User Manual

Page 29

background image

c.

 

When the heat sink is secured, pivot the retention module clip back until the tab snaps into place to secure the heat sink.


7.

 

Lower the airflow shroud over the heat sink.

8.

 

Reconnect the cooling fan power cable to the FAN2 connector on the

system board

.

9.

 

Reconnect the power cable to the PWR connector on the

system board

.

10.

 

Close the computer cover

.

 

11.

 

Connect your computer and devices to electrical outlets, and turn them on.

 

Back to Contents Page

 

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

See also other documents in the category Dell Computers: