Dell PowerVault MD3800i - Manual (Page 44)

To add a storage array using the MD vCenter Plug-in:
1. Click Add Array in the Commands area of the Array Manager view.
Figure 31. Add Storage Array
A dialog box is displayed showing DNS name/IP address text boxes for RAID Controller A and B, as
well as a Password field.
Figure 32. Add Storage Array Dialog
2. In Controller A (DNS or IPv4), enter the IP address or DNS name of RAID controller A on the storage
array.
3. In Controller B (DNS or IPv4), enter the IP address or DNS name of RAID controller B on the storage
array.
4. In Password, enter a password for the storage array you are adding to the MD vCenter Plug-in.
This password will be required by the MD vCenter Plug-in to access the storage array. It will not
change or override an existing storage array password set in Dell MD Storage Manager.
44