Dell Latitude E4200 (Late 2008) - Manual (Page 11)

Configuring the Network Settings 11
3
Configuring the Network Settings
Before you begin using your computer in the Latitude ON™ mode,
you must configure Latitude ON to connect to either a wireless network
or a mobile broadband network.
Enabling the Wireless or Mobile Broadband
Network in the Latitude ON Mode
Right-click the Network Manager icon on the upper right corner of the
Latitude ON desktop.
Ensure that the Enable Networking check box is selected. For more
information on connecting to wireless or mobile broadband,
see "Connecting to a Wireless Network" on page 11 and "Connecting to a
Mobile Broadband Network" on page 12.
NOTE: You cannot enable both the wireless network and the mobile broadband
network at the same time.
Connecting to a Wireless Network
NOTE: To connect to a wireless network, ensure that the wireless network is
enabled on your computer (see "Enabling the Wireless or Mobile Broadband
Network in the Latitude ON Mode" on page 11).
1 Right-click the icon and select both Enable Networking and
Enable Wireless check boxes.
After the wireless card is initialized, left-click the
icon to display
a list of available networks, their signal strengths, and their respective
security levels.
A5_bk0.book Page 11 Tuesday, August 25, 2009 5:03 PM