Dell XPS 15 (9530, Late 2013) - Manual (Page 59)

Removing the Palm-Rest Assembly | 59
Removing the Palm-Rest Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
3 Remove the hard drive. See "Removing the Hard Drive" on page 20.
4 Remove the speakers. See "Removing the Speakers" on page 24
5 Remove the wireless card. See"Removing the Wireless Card" on page 26.
6 Remove the coin-cell battery. See "Removing the Coin-Cell Battery" on page 28.
7 Remove the mSATA card. See "Removing the mSATA Card" on page 30.
8 Remove the fans. See "Removing the Fans" on page 33.
9 Remove the thermal-cooling assembly. See "Removing the Thermal-Cooling
Assembly" on page 35.
10 Remove the power-adapter port. See "Removing the Power-Adapter Port" on
page 37.
11 Remove the I/O board. See "Removing the I/O Board" on page 39.
12 Remove the memory modules. See "Removing the Memory Module(s)" on page 42.
13 Remove the system board. See "Removing the System Board" on page 44.
14 Remove the keyboard. See "Removing the Keyboard" on page 50.