Dell XPS 15 (9530, Late 2013) - Manual (Page 36)

36 | Replacing the Thermal-Cooling Assembly
Replacing the Thermal-Cooling Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the thermal-cooling assembly with the screw holes on the
system board.
2 In sequential order, (indicated on the cooling assembly), tighten the captive screws
that secure the thermal-cooling assembly to the system board.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 17.
2 Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.