Dell SP2309WFP Monitor - Manual (Page 28)

Back to Contents Page
Setting Up the Monitor
Dell™ SP2309W Flat Panel Monitor User's Guide
Unfolding the double-hinged monitor
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (Optional)
Wall-Mounting the Monitor(Optional)
Unfolding the double-hinged monitor
Connecting Your Monitor
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use all the cables on the same computer.
Use all of the cables only when they are connected to different computers with appropriate
video systems.
Connecting the Blue VGA Cable
WARNING: Do not place the double -hinged monitor face down for folding.
The base hinge can spring up and cause serious injury or damage.
1. With the monitor still in its flat, folded state, set it screen-side up on a flat surface.
2. Tilt the panel toward you without touching or putting pressure on the screen.
3. Remove the shipping strap (do not cut it; do not flip the display to remove).
4. Put the shipping strap in a safe place, in case you need it to ship the monitor.
5. Lift and lower the base hinge for proper viewing.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions .