Dell SP2309WFP Monitor User Manual

Page 17

The table below provides a list of all the OSD menu options and their functions.

Touch the

and

keys to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.

To select the highlighted item on the menu touch the

again.

Touch the

and

keys to select the desired parameter.

Touch the

key to enter the slide bar and then use the

key, according to the indicators on the menu, to make your changes.

Select the

to return to previous menu without accepting current settings or

to accept and return to previous menu.

Icon

Menu and Submenus

Description

BRIGHTNESS/CONTRAST Use the Brightness and Contrast menu to adjust the Brightness/Contrast.

Back

Touch

to go back to the main menu.

Brightness

Allows you to adjust the brightness or luminance of the backlight.

Touch the

key to increase brightness and touch the

key to decrease brightness (min 0 ~ max 100).

Contrast

Allows you to adjust the contrast or the degree of difference between darkness and lightness on the monitor screen. Adjust

brightness first, and adjust contrast only if you need further adjustment.

Touch the

key to increase contrast and touch the

key to decrease contrast (min 0 ~ max 100).

Auto Adjust

Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self

adjusts to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune

your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE:

Auto Adjust does not occur if you touch the key while there are no active video input signals or attached cables.

Input Source

Use the Input Source menu to select different video signals that may be connected to your monitor.