Dell PowerEdge C8000 - Manual (Page 62)

62
FILE LOCATION: D:\Projects\User Guide\Server\Dell\OOB\HOM\C8220-C8220X
BMC\BMC\C8220-C8220X_BMC_HOM_section1.fm
OEM Commands Support List
Extended Configuration Commands
This section includes a brief list of the Extended Configurations Commands
in the Dell DCS product specification. See the BMC Firmware Requirements
for DCS/PE-C 1.02 documentation for more details.
Reserved Extended Configuration Command
Get Extended Configuration Command
Table 1-49. Extended Configuration Commands (NetFn: 0x30H)
Extended Configuration Command NetFn CMD C U O A
Reserved Extended Configuration 0x30h 01h X
Get Extended Configuration 0x30h 02h X
Set Extended Configuration 0x30h 03h X
Reset to Defaults 0x30h 04h X
Get Restore Status 0x30h 05h X
Byte Data Field
Request Data — —
Response Data 1 Completion code
2 Reservation ID, 00h is reserved
The BMC shall automatically cancel the
Reservation ID if the value is not used in sub-
sequential Get/Set Extended Configuration
commands within 60 seconds
Byte Data Field
Request Data 1 Reservation ID
2 Configuration ID
3 Attribute ID
4 Index (used by table object only)
5 Data Offset - LSB