Dell Precision M2800 (Early 2014) - Manual (Page 55)

Option Description
Advanced Boot Options Allows you to configure your system for
legacy boot mode. The option is enables
by default.
Date/Time Allows you to set the date and time.
Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
Parallel Port Allows you to define and set how the
parallel port on the docking station
operates. You can set the parallel port
to:
• Disabled
• AT (Default Setting)
• PS2
• ECP
Serial Port Identifies and defines the serial port
settings. You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the
setting is disabled.
SATA Operation Allows you to configure the internal
SATA hard-drive controller. The options
are:
• Disabled
• ATA
• AHCI
• RAID On (Default Setting)
NOTE: SATA is configured to
support RAID mode.
Drives Allows you to configure the SATA drives
on board. The options are:
• SATA-0
• SATA-1
55