Dell PowerVault MD3000 User Manual

Page 37

Using iSCSI

In the confirmation window, type yes to confirm that you want to end

the iSCSI session, and then click

OK.

NOTE:

If you end a session, any corresponding connections terminate the link

between the host and the storage array, and the data on the storage array is

no longer available.

NOTE:

When a session is manually terminated using the MD Storage

Manager, the iSCSI initiator software will automatically attempt to re-

establish the terminated connection to the storage array. This may cause an

error message.

4 Click Save As to save the entire iSCSI sessions topology as a text file.

Viewing iSCSI Statistics and Setting Baseline

Statistics

If the configured storage array has iSCSI technology, the View iSCSI

Statistics option is available only on the iSCSI tab.

1 Click the iSCSI tab, and then click View iSCSI Statistics.
2 Select the iSCSI statistic type you want to view. Select one of these types:

• Ethernet MAC statistics
• Ethernet TCP/IP statistics
• Target (protocol) statistics

3 Choose either Raw statistics or the Baseline statistics.

Raw statistics are all the statistics that have been gathered since the

controllers were started. Baseline statistics are point-in-time statistics that

have been gathered since you set the baseline time.
After you select the statistics type and either raw or baseline statistics, the

details of the statistics appear in the statistics tables.

4 To set the baseline for the statistics, complete the following steps:

Select Baseline Statistics.

Click Set Baseline.