Dell DJ 2 - Manual (Page 15)

A b o u t Yo u r D e v i c e 15
www
.dell.com | support.dell.com
Using the USB Synchronization Cable
Use the USB synchronization cable to connect your device directly to the
computer without using the cradle.
To connect your device to the USB synchronization cable:
1 Connect the larger end of the USB synchronization cable to the dock
connector on your device.
2 Connect the smaller end of the USB synchronization cable to the USB
connector on your computer.
NOTE:
To charge your device from your computer’s USB connector, your
computer must be turned on, and your device turned off.
NOTE:
To charge your device with the AC adapter, connect the power cable to
the AC adapter connector on your USB synchronization cable, and the other
end of the power cable into a wall outlet.
NOTICE:
To avoid damaging the travel charger connector or USB
synchronization cable, disconnect the connectors from your device by pressing
the two buttons on the sides of the connectors to release the self-lock
structure.
Optional
(For charging)