Hybrid cooling fan, Removing the hybrid cooling fan – Dell LATITUDE C510 User Manual
Page 35

Hybrid Cooling Fan: Dell Latitude C610/C510 Service Manual
file:///C|/Work%20Area%20-%20A/E%20DOC%20Posting/latc610/service%20manual/fan.htm[2/1/2013 11:00:49 AM]
Hybrid Cooling Fan
Dell™ Latitude™ C610/C510 Service Manual
Removing the Hybrid Cooling Fan
Removing the Hybrid Cooling Fan
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed
batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on
the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the following procedure.
1. Remove the
.
2. Remove the
3. Remove the
4. Remove the
5. Remove the
microprocessor thermal cooling assembly
.
6. Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure the hybrid cooling fan to the system
board.
Hybrid Cooling Fan Removal