Dell LATITUDE C510 - Manual (Page 22)

Display Assembly, Display Latch, and Hinge Covers: Dell Latitude C610/C510 Service Manual
file:///C|/Work%20Area%20-%20A/E%20DOC%20Posting/latc610/service%20manual/display.htm[2/1/2013 11:00:46 AM]
1 M2 x 3-mm screws (2)
9. Pull up on the pull tab that is attached to the display-feed flex cable connector to remove it from the interface
connector on the system board.
10. Lift the display assembly up and out of the bottom case.
14.1-Inch Display Bezel and Panel
1 rubber screw covers (6) 5 M2 x 4-mm screws (5)
2 M2.5 x 5-mm screws (6) 6 display-feed flex cable
3 display bezel 7 flex-cable retention bracket
4 top cover 8 display panel
Removing the 14.1-Inch Display Bezel
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed