Programming software, Earliest version software requirements for the pc, Programming with crestron systembuilder – Crestron electronic AV2 User Manual
Page 18: Programming with simpl windows
2-Series Integrated Dual Bus Control System
Crestron AV2 & PRO2
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
.
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
-based software tools to develop
a Cresnet system. The following are the minimum recommended software versions
for the PC:
Software
TASK
REQUIRED SOFTWARE VERSION
Program control system to
operate AV2 & PRO2.
SIMPL Windows version 2.02.08 or later
with SIMPL+ Cross Compiler version 1.1 or
later and Library update 145 or later; Also
requires Crestron Database version 15.6.2
or later.
Upload program and firmware.
Crestron Toolbox 1.01.06 or later.
Program with simple wizards
(optional but recommended).
Crestron SystemBuilder™ version 2.0.6 or
later. Refer to software release notes or
Crestron website for other required
Crestron software packages.
Programming with Crestron SystemBuilder
Crestron SystemBuilder is the easiest method of programming, but does not offer as
much flexibility as SIMPL Windows. For additional details, download
SystemBuilder from the Crestron website and examine the extensive help file.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the AV2 & PRO2, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate, but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
14
• 2-Series Integrated Dual Bus Control System: AV2 & PRO2
Operations Guide – DOC. 5957B