Dell PowerVault NX3610 - Manual (Page 23)

Ports Used by the FluidFS Cluster
FluidFS v3 Support Matrix 19
13 Services and Ports
FluidFS systems provide and access services through the ports listed in the following tables. Firewall
settings should allow communication to/from these ports. Actual ports used depend on the enabled
protocols and features. All port numbers are fixed unless specified otherwise.
FluidFS provided services
The following services/ports are provided by FluidFS systems on the client network.
Port Number Protocol Function / Service Name
22 TCP Secure Shell (SSH)
26 TCP FluidFS Replication (from FluidFS v2 systems)
80 TCP Web UI (Not relevant to EqualLogic based systems)
111 TCP and UDP RPC portmapper
161 UDP SNMP agent
162 UDP SNMP trap
427 TCP and UDP Server Location Protocol
443 TCP Web UI (Not relevant to EqualLogic systems)
445 TCP and UDP SMB/CIFS
2049 – 2057 2 TCP and UDP nfsd
3260 TCP FluidFS Replication (EqualLogic based systems. SAN network)
4000 – 4007
2
TCP and UDP statd
4050 – 4057
2
TCP and UDP nlockmgr (NLM )
5001 – 5008
2
TCP and UDP mount
5051 – 5058 2 TCP and UDP quota
9445 TCP FluidFS Replication (trust setup) Compellent and PowerVault based
systems.
10000
1
TCP NDMP
10550 ‐10551,
10560
‐10568
TCP FluidFS Replication
35451 TCP External manager agent. Compellent based systems.
44421 TCP FTP
44430 – 44439 TCP FTP (Passive)
1. Default port number. Can be reconfigured.
2. On NX3500 systems these ranges should be shortened by 4