Dell Latitude D630 - Manual (Page 31)

Back to Contents Page
Media Bay Devices
Dell™ Latitude™ D630 Service Manual
1. If present, remove the device locking screw from the bottom of the computer.
2. If the computer is running, double-click the Safely Remove Hardware icon on the taskbar, click the device you want to eject, and then click Stop.
3. Press the device latch release.
4. Pull the device out of the media bay.
5. Push the new device into the bay until it clicks into place.
6. Replace the device locking screw, if removed in step 1 .
Back to Contents Page
NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them
or placing heavy objects on top of them.
NOTE: If the device locking screw is not present, you can remove and install devices while the computer is running and connected to a docking device
(docked).
1 optical drive 2 device latch release