Dell E2209WFP Monitor - Manual (Page 7)

Depth 6.24 inches (158.5 mm) 6.44 inches (163.7 mm)
Weight
Weight with packaging 14.15 lbs (6.42 kg) 16.76 lbs (7.62 kg)
Weight with stand assembly and cables 10.80 lbs (4.90 kg) 13.16 lbs (5.98 kg)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
8.10 lbs (3.68 kg) 11.92 lbs (5.41 kg)
Weight of stand assembly 2.64 lbs (1.20 kg) 2.73 lbs (1.24 kg)
Environmental Characteristics
Model E2009W/E2209W
Temperature
Operating 5° to 35°C (41° to 95°F)
Non-operating
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C (-4° to 140°F)
Humidity
Operating 10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 3,657.6m (12,000 ft) max
Non-operating 12,192 m (40,000 ft) max
Thermal dissipation
256.08 BTU/hour (maximum)
153.6 BTU/hour (typical)
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following
table shows the power consumption and signaling of this automatic power saving feature:
E2009W
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active Blue 38 W (typical)/43 W (maximum)
Active-off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off - - - Off Less than 1 W
E2209W
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active Blue 40 W (typical)/45 W (maximum)
Active-off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off - - - Off Less than 1 W
The OSD will only function in the normal operation mode. When the menu or plus buttons are pressed in Active-off mode, one of the following messages will be displayed:
Analog Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
OR
Digital Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '99/TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector