Dell E2209WFP Monitor - Manual (Page 28)

Specific Symptoms What You Experience Possible Solutions
Screen image is too small Image is centered on screen, but does not fill
entire viewing area
Check the Scaling Ratio setting in Image Setting OSD.
Reset the monitor to Factory Settings.
Cannot adjust the monitor
with the buttons on the front
panel
OSD does not appear on the screen Turn off the monitor, unplug the power cord, plug back, and then turn
on the monitor.
The picture does not fill the
entire screen.
The picture cannot fill the height or width of the
screen
Due to different video formats (aspect ratio) of DVDs, the monitor may
display in full screen.
NOTE: When choosing DVI-D mode, the Auto Adjust function is not available.
Back to Contents Page