Speaker – Dell Latitude D430 (Mid 2007) User Manual
Page 34
Back to Contents Page
Speaker
Dell™ Latitude™ D430
1.
Follow the instructions in
"Before You Begin" on page 7
.
2.
Remove any installed PC Cards from the PC Card slot.
3.
Remove any installed memory modules or Mini PCI cards (see
Memory
and
Mini-Cards
).
4.
Remove the hard drive (see
Hard Drive
).
5.
Remove the hinge cover (see
Hinge Cover
).
6.
Remove the keyboard (see
Keyboard
).
7.
Remove the internal card with Bluetooth® wireless technology (see
Internal Card With Bluetooth® Wireless Technology
).
8.
Remove the display assembly (see
Display Assembly
).
9.
Remove the palm rest (see
Palm Rest
).
10.
Turn the palm rest upside down and disconnect the speaker connector from the system board.
11.
Remove the two M2 x 3-mm speaker screws from the computer base.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 speaker
2 M2 x 3-mm speaker screws (2)
3 speaker cables routing
4 bottom of palm rest