Palm rest, Removing the palm rest – Dell Latitude D430 (Mid 2007) User Manual
Page 27
Back to Contents Page
Palm Rest
Dell™ Latitude™ D430
Removing the Palm Rest
1.
Follow the instructions in
"Before You Begin" on page 7
.
2.
Remove any installed PC Cards from the PC Card slot.
3.
Remove any installed memory modules or Mini PCI cards (see
Memory
and
Mini-Cards
).
4.
Remove the hard drive (see
Hard Drive
).
5.
Remove the hinge cover (see
Hinge Cover
).
6.
Remove the keyboard (see
Keyboard
).
7.
Remove the internal card with Bluetooth® wireless technology (see
Internal Card With Bluetooth® Wireless Technology
).
8.
Remove the display assembly (see
Display Assembly
).
9.
Turn the computer upside down and remove the seven M2.5 x 5-mm screws from the computer base.
10.
Turn the computer topside up and remove the six M2.5 x 5-mm screws labeled "P" from the top of the palm rest.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 5-mm screws (7)