Keyboard tray, Removing the keyboard tray, Replacing the keyboard tray – Dell Latitude X300 User Manual
Page 24
Back to Contents Page
Keyboard Tray
Dell™ Latitude™ X300 Service Manual
Removing the Keyboard Tray
1.
Remove the
battery
.
2.
Remove the
keyboard
.
3.
Remove the
palm rest
.
4.
Remove the
hinge covers
.
5.
Remove the
display assembly
.
6.
Remove the five M2 x 4-mm screws that secure the keyboard tray to the system board.
7.
Lift the keyboard tray up and slip out the antenna cables before lifting the tray out of the bottom case.
Replacing the Keyboard Tray
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
NOTE:
Each keyboard tray screw has an arrow beside it.
1
keyboard tray
2
M2 x 4-mm screws (5)
98MKC