Keyboard, Removing the keyboard – Dell Latitude X300 User Manual
Page 21
Back to Contents Page
Keyboard
Dell™ Latitude™ X300 Service Manual
Removing the Keyboard
1.
Remove the
battery
.
2.
Remove the four M2 x 4-mm screws labeled with an arrow from the bottom of the computer.
3.
Turn the computer over, and insert a ¼
-inch flat-blade screwdriver into the slot to the right of the keyboard locator tab.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
1
M2 x 4-mm screws (4)
98MKC
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.