Dell Dimension XPS T___ - Manual (Page 7)

support.dell.com Dell Dimension Systems Setup Guide 5
troubleshooting). Use the up- or down-arrow key to highlight the desired option
and press . If no action is taken, the default (highlighted) is selected
automatically after 30 seconds.
11. Press simultaneously at the Begin Logon window.
12. Type your password and click OK.
The Welcome to Windows NT window appears. You can click either of the
following items for additional information, or you can exit from this window and
begin working on the desktop:
‡
What’s New — Learn about new features of Windows NT 4.0.
‡
Help — Use the search facility to find information on a particular subject,
title, word, or phrase.
&UHDWLQJD:LQGRZV17(PHUJHQF\5HSDLU'LVNHWWH
The emergency repair diskette saves your original configuration and can be used to
restore your system to its initial setup state if files become corrupted. It should not be
used as a backup tool.
To create the emergency repair diskette, perform the following steps:
1. Click the Start button, point to Programs, and click the Dell Accessories folder.
2. Click the Create Repair Disk icon.
3. In the Repair Disk Utility window, click Create Repair Disk.
4. Label a diskette “Emergency Repair Disk,” insert it into the diskette drive, and
click OK.
The diskette is formatted and the configuration files are copied to it.
5. When the Repair Disk Utility window reappears, click Exit.
6. Remove the diskette from your diskette drive, and store it in a safe place.
$GGLQJD3ULQWHU
This section provides instructions on how to prepare and add a parallel printer or a
Universal Serial Bus (USB) printer to the computer.
3UHSDULQJD3ULQWHU
See the documentation that came with the printer for any preparation procedures
that are recommended by its manufacturer. You may be instructed to perform the
following tasks:
‡
Remove the manufacturer’s shipping packaging
‡
Install the toner cartridge