beautypg.com

0lfurvriw:lqgrzv17 – Dell Dimension XPS T___ User Manual

Page 5

background image

support.dell.com

Dell Dimension Systems Setup Guide 3

10. If you ordered Dellnet, click Next and proceed to the next step.

If a screen appears that prompts you to set up your Internet access or provides

information about how to connect to the Internet, follow the instructions that

appear on the screen or click Skip to bypass Internet setup and information.

If no prompt appears, proceed to the next step.

11. If an animated tutorial starts and introduces you to your computer and the

Microsoft products installed on it, watch the tutorial and then click Next.

12. Click Finish.

13. If the Date/Time Properties window shows the correct time and date for your

area, click Close. Otherwise, enter the correct time and date, click Apply, and

then click OK.

Windows 98 Second Edition is now set up and the Windows desktop appears on

the screen.

14. If the IntelliMouse Productivity Tips window is open on the Windows desktop,

read the window’s contents. Click the Show Tips at Windows Startup box to

uncheck it, and then close the window by clicking the X in the upper-right corner.

Proceed to “Adding a Printer” for instructions on how to connect a printer and to

“Information Resources” for descriptions of reference tools that are included with

your Dell system.

0LFURVRIW:LQGRZV17

If you are on a local area network (LAN), check with your network administrator before

setting up Windows NT for information relevant to the setup process, such as the

system name, the administrator password, and required network protocols. Also attach

the network cable (if applicable) and connect any devices you want to use with your

system. For instructions, see the Getting Started sheet that accompanied your system.

127,&('RQRWLQWHUUXSWWKHRSHUDWLQJV\VWHP·VVHWXSSURFHVV'RLQJVR

PD\UHQGHU\RXUFRPSXWHUXQXVDEOH

Initial setup of Windows NT takes about 15 minutes. The setup process is customized

according to which computer components you have. To configure Windows NT for

your system, perform the following steps:

1.

Turn on your system as instructed in the Getting Started sheet that accompanied

your system.

The Dell Software License Agreement appears. It is important that you read

and understand the license agreement. You must accept the agreement to

proceed with the setup of your system.

2. Type \ if you accept the Dell software license agreement.

The Technical Support Information window appears.