Dell PowerVault NX3500 User Manual
Page 184
Replication Internal Error
Description
Replication between the source and the destination NAS volumes fails due to an
internal error.
Workaround
Contact Dell to resolve this issue.
Replication Jumbo Frames Blocked
Description
Replication between the NAS source volume and NAS destination volume fails
because the jumbo frames are blocked over the network.
Cause
Replication task fails because jumbo frames are blocked over the network.
Workaround
The administrator must verify that the network configuration between the source
cluster and the destination cluster has enabled transferring jumbo frames across the
switches or routers.
Replication Destination Does Not Have Enough Space
Description
Replication between NAS source volume and NAS destination volume fails because
there is not enough space in the destination NAS volume.
Cause
Replication task fails because there is not enough space in the destination NAS
volume.
Workaround
Increase the space of the destination NAS volume.
Replication Source Is Busy
Description
Replication between the NAS source volume and the NAS destination volume fails
because the file system of the source NAS volume is busy replicating other NAS
volumes.
Cause
Replication task fails because the file system of the source NAS volume is busy
replicating other NAS volumes.
Workaround
The replication continues automatically when the file system releases part of the
resources. The administrators must verify that the replication automatically continues
after a period of time (an hour).
Replication Source Is Down
Description
Replication between the NAS source volume and the NAS destination volume fails
because the file system of source NAS volume is down.
Cause
The file system of the source NAS volume is down.
Workaround
Administrators must check if the NAS cluster solution is down in the source system,
by checking the monitoring section of the NAS Manager. If the NAS cluster solution is
down, the administrators must start the file system on the source cluster. The
replication continues automatically when the file system starts.
Replication Source Is Not Optimal
Description
Replication between the source and the destination NAS volumes fails because the file
system of the source NAS volume is not optimal.
Cause
Replication fails since the file system of the source is not optimal.
184