beautypg.com

Dell Precision T1700 (Mid 2013) User Manual

Page 35

background image

Option

Description

C States Control

Allows you to enable or disable the additional processor sleep states. This option is

enabled by default.

Limit CPUID Value

This field limits the maximum value the processor Standard CPUID Function will

support

Enable CPUID Limit (this option is disabled by default)

NOTE: Some Operating system will not complete installation when the maximum

CPUID Function is greater than 3

Intel TurboBoost

Allows you to enable or disable Intel TurboBoost mode of the processor.

Disabled - Does not allow the TurboBoost driver to increase the performance

state of the processor above the standard performance.

Enabled - Allows the Intel TurboBoost driver to increase the performance of

the CPU or graphics processor.

Hyper-Thread Control

Allows you to enable or disable the Hyper-Threading technology. This option is

enabled by default.

Rapid Start Technology

Allows you to improve batter life by automatically putting the system into a low power

status during after user specified amount of time.

Intel Rapid Start feature (this option is disabled by default)

NOTE: Rapid Start Technology will automatically be disabled due to configuration

changes:

Hard Disk Configuration or partition have been changed

Memory capacity over 8GB installed.

System or HDD password is enabled

A Dell Encryption Accelerator is installed

The Block Sleep setting is enabled

Table 7. Power Management

Option

Description

AC Recovery

Specifies how the computer will respond when AC power is applied after an AC

power loss. You can set the AC Recovery to:

Power Off (default)

Power On

Last Power State

Auto On Time

This option sets the time of the day when you would like the system to turn on

automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The

startup time can be changed by typing the values in the time and A.M./P.M. fields.

Disabled - The system will not automatically power up.

Every Day - The system will power up every day at the time you specified

above .

Weekdays - The system will power up Monday through Friday at the time you

specified above.

35