Removing the front bezel, Installing the front bezel, Removing the expansion card – Dell Precision T1700 (Mid 2013) User Manual
Page 10
Installing the Wireless Local Area Network (WLAN) Card
1.
Insert the WLAN card into the connector on the system board and press down until it is secured.
2.
Affix the latch.
3.
Place the antenna puck on the connector and tighten the screws to secure it to the computer.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Pry the front bezel retention clips away from the chassis located at the edge of front bezel. Rotate the front bezel
away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
Installing the Front Bezel
1.
Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2.
Rotate the bezel toward the computer to engage the front-bezel retention clips until they click into place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Expansion Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Press the tab to release the latch.
10