Dell P1914S Monitor - Manual (Page 27)

Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect either the white (digital DVI-D) or the blue (analog VGA) or
the black (DisplayPort) display connector cable to the corresponding
video port on the back of your computer. Do not use the three cables
at the same time. Use both the cables only when they are connected
to the three different computers with appropriate video systems.
Connecting the blue VGA Cable
Connecting the white DVI cable
Setting Up the Monitor

27