Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 54)

54 | Replacing the Control-Buttons Board
Replacing the Control-Buttons Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the control-buttons board under the control-buttons bezel and make sure
that the control-buttons board fits in the slot on the display bezel.
2 Connect the control-buttons board cable to the control-buttons board.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 44.
2 Replace the computer base. See "Replacing the Computer Base" on page 20.
3 Replace the base cover. See "Replacing the Base Cover" on page 17.
book.book Page 54 Thursday, August 1, 2013 1:03 PM