Dell Inspiron 23 (2350, Mid 2013) - Manual (Page 14)

14 | Replacing the Memory Module(s)
Replacing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the notch on the memory module with the tab on the memory-module
connector.
2 Insert the memory module into the memory-module connector, and press the
memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
3 Insert the tabs on the memory-module cover into the slots on the base cover and
then slide the memory-module cover into place.
NOTE: Make sure that the captive screw on the memory-module cover aligns
with the screw hole on the base cover.
4 Tighten the captive screw that secures the memory-module cover to the base
cover.
1 tab 2 notch
2
1
book.book Page 14 Thursday, August 1, 2013 1:03 PM