Image settings (no input source) – Dell 1420X Projector User Manual
Page 32

T
INT
—Press
to decrease the amount of green in the image and
to increase
the amount of red in the image (available for NTSC only).
W
HITE
I
NTENSITY
—Use
and
to adjust the display white intensity.
C
OLOR
S
PACE
—Allows you to select the color space, options are: RGB, YCbCr, and
YPbPr.
VGA O
UTPUT
—Select On or Off to enable or disable the VGA output function at
projector standby status. Default is Off.
NOTE:
If you adjust the settings for Color Temperature, RGB Color Adjust,
Saturation, Sharpness, Tint and White Intensity, the projector automatically
switches to Custom.
Image Settings (No Input Source)
Select and press
to activate image settings. The image settings menu provides
the following options:
Advanced Settings
Dell 1420X
Image Settings
VGA Output
Off
Display Settings
Projector Settings
Menu Settings
Power Settings
Information
Resolution: 1440x1050
VGA O
UTPUT
—Select On or Off to enable or disable the VGA output function at
projector standby status. Default is Off.
Using Your Projector
32