Dell Studio XPS 435 MT (Late 2008) - Manual (Page 13)

11
Setting Up Your Studio XPS Desktop
Connect the Network Cable
(Optional)
A network connection is not required to
complete your computer setup, but if you have
an existing network or Internet connection that
uses a cable connection (such as a broadband
device or Ethernet jack), you can connect it
now.
NOTE: Use only an Ethernet cable to
connect to the network connector (RJ45
connector). Do not plug a telephone
cable (RJ11 connector) into the network
connector.
To connect your computer to a network or a
broadband device, connect one end of the
network cable to the network port or the
broadband device. Connect the other end of the
network cable to the network connector (RJ45
connector) on the back panel of your computer.
A click indicates that the network cable has
been securely attached.