Dell PowerVault MD3000i - Manual (Page 22)

22 ׀ Dell PowerVault Data MD3000i Support Matrix
Figure 7. Proper Cabling of Expansion Enclosures in a Dual-Controller Configuration
___________________
Information in this document is subject to change without notice.
© 2010 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, PowerConnect, PowerVault, PowerEdge, Dell OpenManage, and the DELL logo
are trademarks of Dell Inc.; Microsoft, Windows, Windows Server, and Windows Vista are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries; Red Hat and Red Hat
Enterprise Linux are registered trademarks of Red Hat Inc. in the U.S. and other countries; SUSE is a registered
trademark of Novell, Inc. in the United States and other countries. 3Com and SuperStack are registered trademarks of
3Com Corporation. Intel and NetStructure are registered trademarks of the Intel Corporations in the U.S.A. and other
countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
September 2011 Rev. A28
Expansion
enclosures (2)
MD3000i Storage Array (upgraded to duplex configuration)