Dell PowerVault MD3820f - Manual (Page 15)

Figure 9. Site Recovery Manager Advanced Settings
2. Click storage and set the following values:
– storage.commandTimeout = 900
– storageProvider.hostRescanRepeatCnt = 2
– storageProvider.hostRescanTimeoutSec = 900
3. Click OK to save your changes.
4. Click storageProvider and set the following values:
storageProvider.fixRecoveredDatastoreNames = enabled
ESX/ESXi Host Settings
The following changes are recommended for ESX/ESXi host settings:
• Disk.MaxLUN — Set this value slightly larger than the number of LUNs mapped to the ESX/ESXi host. This
provides faster rescan operations by not scanning all 256 LUN possibilities.
• Disk.UseDeviceReset = 1
and
Disk.UseLunReset = 0
Disk.UseDeviceReset and Disk.UseLunReset are used together to indicate how device resets are
issued.
15