Dell PowerEdge VRTX - Manual (Page 3)

Supported platforms
M630, M520, M620, and M820 servers
Supported Server Modules
• Mainboard firmware: 2.00 or later
• iDRAC7 Version: 1.66.56 or later
• iDRAC8 Version: 2.05.05 or later (M630 Servers)
• PowerEdge M520 BIOS Version: 2.1.3 or later
• PowerEdge M620 BIOS Version: 2.2.7 or later
• PowerEdge M820 BIOS Version: 2.0.24 or later
• PowerEdge M820 BIOS Version: 0.3.35 or later
What’s New?
Release 2.0
• 13 th generation M630 Blade Server enablement for VRTX Chassis.
• 1600W PSU support.
• Broadcom 1GE quad-port NDC supported on M630 for VRTX Chassis.
• Emulex ARI NDC and Mezzanine cards support on M630 for VRTX Chassis.
• Intel 1G and NDC support on M630 for VRTX Chassis.
• Option to use an external library (CIFS/NFS directory created by the sysadmin) for update
repositories and profiles.
• Option to see and use captured profiles stored on an external library.
• Assign a profile in a library to a slot for Quick Deploy of Profiles.
• 13G COMMs card Firmware and Driver Refresh.
• ARI support for COMMs Cards.
• IO identity Feature support.
• CMC signed image firmware update verification.
Fixes
Release 1.36
• Fixed an issue in the CMC graphical user interface to allow editing a virtual disks policy while in
Fault Tolerant (dual PERC) mode.
Release 1.35
• Fixed an issue in RACADM related to alert event filter configuration.
• Fixed an issue in CMC web interface related to Chassis OverView-> Alerts->Chassis Events
page. The Chassis Events page was not loading on the web interface due to certain alert
configuration settings that were not working with the following filters: System-SEC-Warning,