Dell Inspiron 700M - Manual (Page 55)

Solving Problems
55
CD and DVD drive problems
NOTE:
High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a
defect in the drive or the CD or DVD.
NOTE:
Because of different regions worldwide and different disc formats, not all DVD titles work in all
DVD drives.
Problems writing to a CD/DVD-RW drive
If you cannot eject the CD, CD-RW, DVD, or DVD+RW drive tray
E NSURE THAT THE C D IS SNAPPED ONTO THE SPINDLE
C HECK THE CABLE CONNECTIONS
C HECK FOR HARDWARE INCOMPATIBILITIES
R UN THE D ELL D IAGNOSTICS ( SEE PAGE 4 7 )
C LOSE OTHER PROGRAMS — The CD/DVD-RW drive must receive a steady stream of data when
writing. If the stream is interrupted, an error occurs. Try closing all programs before you write to the
CD/DVD-RW.
T URN OFF S TANDBY MODE IN W INDOWS BEFORE WRITING TO A C D / D V D - R W DISC — See the Dell
Inspiron Help file (see "Finding Information" on page 9) or search for the keyword standby in the
Windows Help and Support Center for information on power management modes.
C HANGE THE WRITE SPEED TO A SLOWER RATE — See the help files for your CD or DVD
creation software.
1 Ensure that the computer is shut down.
2 Straighten a paper clip and insert one end into the eject hole at the front of the drive; push firmly until
the tray is partially ejected.
3 Gently pull out the tray until it stops.