Dell Studio Desktop D540 (Late 2008) - Manual (Page 23)

8. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
9. Replace the computer cover (see Replacing the Computer Cover ).
10. Connect your computer and devices to electrical outlets, and then turn them on.
11. If a message appears stating that memory size has changed, press to continue.
12. Log on to your computer.
13. Right-click the My Computer icon on your Microsoft ® Windows ® desktop and click Properties.
14. Click the General tab.
15. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Back to Contents Page
1 cutouts (2) 2 memory module
3 notch 4 memory module connector
NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the
module.