Dell PowerVault NX1950 - Manual (Page 5)

Table 1-7. Stack B — Storage Software Components for PowerVault NX1950 Using Windows Unified Data Storage Server 2003, Standard
and Enterprise Edition
EMC|Gateway Solution
Table 1 -8 provides information on supported solution stack for Gateway solution.
Table 1-8. Stack A — Pre-installed Storage Software Components for PowerVault NX1950 Using Windows Unified Data Storage Server
2003, Standard and Enterprise Edition
Server 2003, Standard Edition x64
QLogic 2460 Single Channel 4-GB
Optical Fiber Channel HBA Firmware: v1.24
Driver: 9.1.4.15
support.qlogic.com For direct-attached tape solutions only
QLogic 2462 Dual Channel 4-GB
Optical Fiber Channel HBA Firmware: v1.24
Driver: 9.1.4.15
support.qlogic.com For direct-attached tape solutions only
NOTE: All software components in this table are pre-installed on your PowerVault NX1950 storage solution.
NOTE: Table 1 -7 provides the software stack that is pre-installed on systems that shipped from December 2007 to April 2008.
Component Version Location Details
PowerVault MD3000 Storage Array Firmware:
06.70.10.60
support.dell.com firmware also supports expansion
PowerVault MD1000 Storage Array A03 support.dell.com Expansion only (R152015.exe)
SAS 5/E HBA Driver: 1.24.04.00
Firmware:
00.10.51.00.06.12.05.00
support.dell.com For direct-attached PowerVault
MD3000 solution only
Modular Disk Storage Manager 02.70.G6.10 support.dell.com Available on the Dell PowerVault
MD3000 Resource CD
VDS/VSS provider 09.70.G6.02 Available on the Dell PowerVault
MD3000 Resource CD SMProvider- WSx64-09.70.G6.02.exe
Dell Storage Initialization Wizard 1.1.0 support.dell.com
Dell PowerVault NX1950 Firewall Script Batch File -
Integrated for Windows Unified Data Storage Server
2003, Standard Edition 1.0.0 support.dell.com
Microsoft
®
Windows
®
Unified Data
Storage Server 2003, Standard Edition
x64
Dell NX1950 Firewall Script Batch File - Integrated for
Windows Unified Data Storage Server 2003,
Enterprise Edition 1.1.0 support.dell.com Firewall for Enterprise edition
QLogic 2460 Single Channel 4-GB Optical Fiber
Channel HBA Firmware: v1.24
Driver: 9.1.4.15
support.qlogic.com For direct-attached tape solutions
only
QLogic 2462 Dual Channel 4-GB Optical Fiber Channel
HBA Firmware: v1.24
Driver: 9.1.4.15
support.qlogic.com For direct-attached tape solutions
only
NOTE: The software stack listed in this table is pre-installed on your storage solution.
NOTE: If you are using the stack-B (older version) software components, it is recommended that you download the components listed in stack A from
the Dell Support website at support.dell.com and upgrade your system.
NOTE: Table 1 -8 provides information on supported stack software that is pre-installed on systems shipping from April 2008 onwards.
Component Version Location
Dell|EMC Arrays CX300, CX500, CX700, CX3-10c, CX3-20, CX3-20F, CX3-20c,
CX3-40, CX3-40F, CX3-40c, and CX3-80 (EMC
® FLARE ® 26)
AX 4-5 (FLARE 23) emc.com/dell-ax4-
5support
AX 150 (FLARE 20) emc.com/dell-
ax150support
QLogic 2460 Single Channel 4-GB Optical Fiber Channel HBA 9.1.4.15 support.qlogic.com
QLogic 2462 Single Channel 4-GB Optical Fiber Channel HBA 9.1.4.15 support.qlogic.com
EMC PowerPath™ 5.1.1 powerlink.emc.com