Dell UPS 5600R - Manual (Page 21)

21 Upgrading UPS Firmware |
Upgrading UPS Firmware
This chapter describes how to use the Dell UPS Upgrade Software utility to upgrade Dell UPS firmware.
The instructions describe the upgrade procedure in the following sequence:
S
Selecting upgrade settings
S
Validating the operating state of the UPS and the upgrade settings you selected
S
Completing the upgrade process
NOTE: You can upgrade only one UPS at a time.
To select upgrade settings, perform the following:
1 Review the important information in “Before you Begin” on page 20.
2 Start the Dell UPS Upgrade Software utility using the option you selected on the Choose Shortcut
Folder window during installation.
For example, if you accepted the default start-up method (In a new Program Group), select the
utility using the Start menu > All Programs > Dell UPS Upgrade Software path (see Figure 13).
The Dell UPS Upgrade Software window opens.
Figure 13. Starting the Utility from the Start Menu
4