Dell PowerVault DL2100 - Manual (Page 8)

Configuring a Dell ™ AX 4-5 Fiber Channel Array as a Backup Target for CommVault™ Simpana™
Page 6
Using Navisphere Manager
1. Launch a Web Browser. Navigate to the Management port of the Dell AX4-5F Array and login to
the EMC Navisphere Manager.
2. Expand the Dell AX4-5F Array. Right click on “Storage Groups” and select “Create Storage
Group”.
3. Enter a name for the Storage Group and click OK.
4. Right Click on the newly created Storage Group and select “Connect Hosts”.
5. Select the DL Backup to Disk Appliance from the list of Available Hosts. (See Figure 5). Move it
to the “Hosts to be Connected” list and click OK.
Figure 5: Connecting the Host to a Storage Group
6. Right click the Storage Group and select “Select LUNs”.
7. Select the desired LUNs from the list of Available LUNs and click OK. (See Figure 6)