Dell POWEREDGE R710 - Manual

02 - 2013
Statement of Volatility – Dell PowerEdge R710
The Dell PowerEdge R710 contains both volatile and non-volatile (NV) components. Volatile components lose
their data immediately upon removal of power from the component. Non-volatile components continue to retain
their data even after the power has been removed from the component. Components chosen as user-definable
configuration options (those not soldered to the motherboard) are not included in the Statement of Volatility.
Configuration option information (pertinent to options such as microprocessors, remote access controllers, and
storage controllers) is available by component separately. The following NV components are present in the
PowerEdge R710 server.
Component
Non-
Volatile
RAM
Volatile
RAM Reference
Designator
Qty Size
Type (e.g.,
Flash PROM,
EEPROM)
Planar
System BIOS SPI Flash Y U_SPI_BIOS 1 4MB
Flash
EEPROM (SPI
interface)
LOM Configuration Data Y U15, U16 2 512KB FLASH (NOR)
iDRAC6 Controller ROM Y U_IBMC 1 4KB ROM
iDRAC6 Controller RAM Y U_IBMC 1 8KB RAM
System CPLD (EPROM) Y U_CPLD 1
1200 Macro
cells Internal Flash
EEPROM
System CPLD (RAM) Y U_CPLD 1 1KB RAM
iDRAC6 Express Internal
Flash
Y U_EMMC 1 1GB NAND FLASH
System RAM Y
J_CPU(2:1)_C
H(2:0)_DIMM(3
:1)
18
up to 18
DIMMs *16GB
RAM
TPM ID EEPROM
(Plug in module only)
Y U_SEEPROM 1 256B EEPROM
TPM Binding EEPROM
(on China planar only)
Y U7261 1 256B EEPROM
iDRAC6 SDRAM Y
U_IBMC_ME
M
1 128MB DDR2 RAM
iDRAC6 FRU Y
U_IBMC_FR
U
1 4KB EEPROM
iDRAC6 Boot Block Flash Y U_IBMC_SPI 1 2MB FLASH (NOR)