Dell 5530/dn Mono Laser Printer - Manual

February 2014
Statement of Volatility – Dell 5530dn
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell 5530dn Mono Laser Printer contains both volatile and non-volatile (NV) components. Volatile components lose
their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain
their data even after power is removed from the component. The following NV components are present on the system
board.
Table 1. List of Volatile and Non-Volatile Components on System Board
Notes :
• EEROM may be used and could contain user data.
• User Data utilized by memory type.
______________
Copyright © 2014 Dell Inc. All rights reserved.
This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of
Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their
respective companies.
Mono Laser
Products
5530dn
Memory
Application Memory
Size
Memory Type
Volatile/
Non-Volatile
User Data
Firmware,
Usage,
Statistics,
Configuration
64 MB
(code
store) NAND Non-volatile Yes
EEPROM 16 Kb EEPROM Non-volatile Yes
Base Memory 256 MB SDRAM Volatile No
Optional
Memory
256 MB,
512 MB,
1 GB
SDRAM Volatile No
Cartridge 16 Kb EEPROM Non-volatile No
Fuser 2 Kb EEPROM Non-volatile No
CAUTION: All other components on the motherboard will lose data if power is removed from the system. Primary power loss
(unplugging the power cord) will cause user data on the memory to be lost.