Osd warning messages, Operating the monitor 47 – Dell UP2715K Monitor User Manual
Page 47
Operating the Monitor 47
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see
the following message:
The current input timing is not supported by the monitor display. Please
change your input timing to
5120x2880 @ 60Hz
or any other monitor
listed timing as per the monitor specifications.
Dell UP2715K
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See
for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is
5120 x 2880.
You will see the following message before the DDC/CI function is disabled.
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
No
Yes
Dell UP2715K
When monitor enters Power Save Mode, the following message appears:
Entering Power Save Mode
Dell UP2715K
Activate the computer and wake up the monitor to gain access to the
If you press any button other than the power button, one of the following
messages will appear depending on the selected input: