Dell UP2715K Monitor - Manual (Page 29)

Setting Up the Monitor  29
Connecting the USB 3.0 cable
After you have completed connecting the DP-mDP cables, follow the
procedure below to connect the USB 3.0 cable to the computer and complete
your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB
3.0 port on your computer.
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Plug the power cables for your computer and monitor into nearby outlet.
4. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
display an image, see
Troubleshooting .
USB
CAUTION: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.