Dell PowerVault 124T - Manual (Page 17)

LTO Media Handbook 17
Dell PowerVault
110T LTO-2 No seven segment display
indicator.
• Activity light blinks green.
• Ejects tape shorty after.
• Pre firmware 53Y3: No seven
segment display indicator. Activity
light blinks green but ejects tape
shortly after inserting.
• Firmware 53Y3 and newer:
– Seven segment display shows 7
– Activity light blinks amber
– Ejects tape shortly after
inserting. When tape is
completely removed, all light
indicators turn off.
Dell PowerVault
110T LTO-2-L
(Certance) • Power light on solid green.
• Activity light on solid
green.
• Status light on solid amber.
• Ejects tape when
complete.
• Power light on solid green.
• Activity light on solid green.
• Status light blinks amber.
• Ejects tape shortly after inserting.
Dell PowerVault
110T LTO-2-L
(Tandberg) • Press and hold the Eject
button for 6 seconds. The
drive enters the service
mode indicated by all
LEDs flashing slowly.
• Press Eject twice. The
Activity LED flashes fast.
• Ejects tape shorty after.
• Cleaning light turns on.
• Activity light flashes.
• Fault light flashes.
• Cartridge hold in the drive
When pressing Eject button, the
cartridge is ejected and the Cleaning
light stays on.
Dell PowerVault
110T LTO-3 No seven segment display
indicator.
• Activity light blinks green
• Ejects tape shorty after.
• Seven segment display shows 7.
• Activity light blinks amber.
• Ejects tape shortly after inserting.
When tape is completely removed,
all light indicators turn off.
Table 9. Characteristics of Expired LTO Cleaning Tape in Various Drives (continued)
Drive Type Cleaning with a Good Tape Cleaning with an Expired Tape