Dell Latitude 110L - Manual (Page 33)

.
3. Align the EMI shield retention tabs with the retention-tab slots on the computer base and rotate the front until it lies flat.
4. Replace the four M2.5 x 5-mm screws that secure it to the system board.
Removing the Microprocessor Thermal-Cooling Assembly
1. Follow the instructions in " Before Working Inside Your Computer ."
2. Remove the keyboard .
1 M2 x 3-mm screws (2)
2 fan connector
1 M2.5 x 5-mm screws (4)
2 shield retention tabs (3)
3 shield-retention tab slots
CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.