Dell PowerVault 110T LTO3 User Manual
Dell, Powervault, 110t lto-3 tape drive user's guide
Dell
TM
PowerVault
TM
110T LTO-3 Tape Drive User's Guide
Information in this document is subject to change without notice.
©
2005 Dell Inc. All rights reserved.
©
International Business Machines Corporation, 2005. All rights reserved.
Trademarks used in this text: Dell, PowerVault, and the DELL logo are trademarks of Dell Inc. Microsoft and Windows are registered trademarks of Microsoft
Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc.
disclaims any proprietary interest in trademarks and trade names other than its own.
Restrictions and Disclaimers
The information contained in this document, including all instructions, cautions, and regulatory approvals and certifications, is provided by the supplier and has
not been independently verified or tested by Dell. Dell cannot be responsible for damage caused as a result of either following or failing to follow these
instructions.
All statements or claims regarding the properties, capabilities, speeds, or qualifications of the part referenced in this document are made by the supplier and
not by Dell. Dell specifically disclaims knowledge of the accuracy, completeness, or substantiation for any such statements. All questions or comments relating
to such statements or claims should be directed to the supplier.
Model Number LTO3-EX1
Initial release: May 2005
Introduction
Setting Up the Tape Drive
Using the Tape Drive
Using the Tape Backup Software
Troubleshooting
Specifications
Glossary
NOTE: A NOTE indicates important information that helps you make better use of your system.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.