Dell PowerVault MD3000 - Manual (Page 26)

26
Storage Array
Sender e-mail settings include the SMTP and e-mail address information MD
Storage Manager uses to send e-mail alerts. To configure sender e-mail
settings:
1 Click the Tools tab, then click Set Up Email Alerts.
2 Enter the following information:
• Sender email address — The e-mail address that appears as the sender
on every e-mail alert, such as that of the network administrator.
• Mail (SMTP) server — The name of the Simple Mail Transfer
Protocol (SMTP) gateway of the mail server from which e-mail alerts
will be sent. For example,
smtp.mycompany.com .
• Edit Sender Contact Information (Optional) — Additional
information about the sender such as the sender’s name, company,
and phone number. This information is optional; e-mail alerts will
work if contact information is not provided.
To specify to whom alerts are sent:
1 Click the Tools tab, then click Set Up Email Alerts.
2 Type an e-mail address in the Recipient email addresses text box and click
Add to add it to the list of configured e-mail addresses.
3 Specify the following for each e-mail address in the list (to choose a
different setting, click the down arrow to the right of the field):
Information To Send — Select one of the following options from the
drop-down list:
• Event Only — The alert e-mail contains only the event
information. This alert type is the default.
• Event + Profile — The alert e-mail contains the event
information and the storage array profile.
• Event + Support — The alert e-mail contains the event
information and a compressed file that contains complete support
information for the storage array that has generated the alert.
Frequency — Select one of the following options from the drop-down list:
• Every event — Sends an e-mail whenever an event occurs. This
option is the default.