Dell Mobile Projector M900HD - Manual (Page 33)

P OWER S ETTINGS — Select and press to activate power settings. The
power settings menu provides the following options:
P OWER S AVING —By default, the projector is set to enter power
saving mode after 120 minutes of no activity. A warning
message appears on screen showing a 60 seconds countdown
before switching to power saving mode. Press any button
during the countdown period to stop the power-saving mode.
You can also set a different delay period to enter power saving
mode. The delay period is the time you want the projector to
wait without an input signal.
If an input signal is not detected during the delay period, the
projector turns off. To turn on the projector, press the Power
button.
LED M ODE —Allows you to select between Normal or ECO mode.
Normal mode operates at full power level. ECO mode operates
at a lower power level which may provide longer LED life,
quieter operation, and dimmer luminance output on the screen.
I NFORMATION — The information menu displays the current M900HD
projector settings.
Using Your Projector 33